Help Setting up Nuo 4 - TranceAddict Forums

TranceAddict Forums (www.tranceaddict.com/forums)
- DJ Booth
-- Help Setting up Nuo 4

Posted by saltytheseagull on Aug-18-2006 04:04:

Help Setting up Nuo 4

I got all my gear and I need some help setting up my nuo 4. I've got my TT's on channels one and two. My problem is that they both play no matter where the crossfader is. How do I assign them to different channels. Thanks.

Posted by mnemonic. on Aug-18-2006 04:49:

right above the up fader for channel 1 there is a 3 way toggle switch it says XFA MIX XFB

swing that toggle above channel one towards the XFA Button, that is now side A of the crossfader, XFA = Crossfader A

now look above channel 2..

same thing, set the toggle over to XFB.

thing is, traditionally i work on channels 1 and 4, and especially on the Nuo, because 2 and 3 are MIDI Capable, so it just saves me reconnecting everything later when i decide to plug the computer in.

Posted by skot_e on Aug-18-2006 11:50:

Re: Help Setting up Nuo 4

quote:
Originally posted by saltytheseagull
I got all my gear and I need some help setting up my nuo 4. I've got my TT's on channels one and two. My problem is that they both play no matter where the crossfader is. How do I assign them to different channels. Thanks.

Seriously, sif you doidn't know it was the thingy on the bit that has the other bit... hello manual

Posted by T-Soma on Aug-18-2006 13:22:

Sounds funny that you have baught a nuo4 and cant quiet figure it out. Your going to have fun with the midi

Posted by mnemonic. on Aug-18-2006 13:55:

i dont even have mine yet and i seem to know it like the back of my hand already, high resolution images, and product demo videos are the Shit !

Posted by saltytheseagull on Aug-18-2006 16:10:

Thanks for your help. I have one more question. If I want to work on channels one and four what do I do with the TT groundwire on CH4. Thanks.

Posted by Soundwerks on Aug-18-2006 16:52:

you can just put all groundwires on the same grounding post on the back of the mixer

Posted by on Aug-19-2006 01:52:

LOL @ This thread...

You went an bought this high end mixer, and you have LIMITED knowledge of even hooking your gear up... Have fun man..

Posted by mnemonic. on Aug-19-2006 03:53:

quote:
Originally posted by J:\Digital
LOL @ This thread...

You went an bought this high mixer, and you have LIMITED knowledge of even hooking your gear up... Have fun man..

like he said...

but no offence man, Have fun, good luck and all the best of luck to you when you wanna try out that fancy midi channel

shit i dont even have my Nuo 4 yet and i already know a hell of a lot about it escept for that audio card problem, thank you Josh for the answer to that one.

Posted by on Aug-19-2006 04:57:

quote:
Originally posted by MikeyN
like he said...

but no offence man, Have fun, good luck and all the best of luck to you when you wanna try out that fancy midi channel

shit i dont even have my Nuo 4 yet and i already know a hell of a lot about it escept for that audio card problem, thank you Josh for the answer to that one.

Hope I was of some help!

Posted by mnemonic. on Aug-19-2006 05:52:

quote:
Originally posted by J:\Digital
Hope I was of some help!

yeah, frickin right you were of help, i ended up getting a new M-Audio Audiophile 192 for 115 USD on eBay...im actually wondering if it's Hot...should get here wednesday though nonetheless and my nuo 4 about the same time...

Posted by on Aug-19-2006 15:24:

quote:
Originally posted by MikeyN
yeah, frickin right you were of help, i ended up getting a new M-Audio Audiophile 192 for 115 USD on eBay...im actually wondering if it's Hot...should get here wednesday though nonetheless and my nuo 4 about the same time...

Nice.. I was actually looking at the M-Audio sound cards this past week when I went to buy some new monitor speakers and the 192 was $164.00 at my local shop here and thats in CAN... so 115.00 is a good deal, but I doubt its hot...

Posted by Soundwerks on Aug-19-2006 16:50:

did ya get your t-shirts and stuff yet?

Posted by AnomalyConcept on Aug-19-2006 17:38:

You get an Ecler shirt w/ Nuo4 purchase???

Good luck w/ setting it up.

I suppose I was in the same situation as you- buying high-end equipment with limited knowledge how to set it up (first mixer, even).

I just have 2 CDJs hooked up to 1/4 and maybe will hook 2/3 up to computer or computer -> input 5.

MIDI is fun, but it took me a little bit to get it to work how I wanted.

Great mixer overall, but then again, I'm biased. =)

Posted by on Aug-19-2006 17:45:

quote:
Originally posted by Soundwerks
did ya get your t-shirts and stuff yet?

Yes, I did... Thank you very much... its great.

Posted by saltytheseagull on Aug-23-2006 15:00:

I appriciate the help. I didn't get a t-shirt. How can I get one? As far as the high end equipment with limited knowledge goes. Why buy something you will have to upgrade down the road? I like to keep my options open.

Posted by AnomalyConcept on Aug-23-2006 15:04:

I didn't get a t-shirt either. I did get a nice Ecler sticker, though. But that was inside the box.

I don't foresee upgrading my Nuo4; and I'm with you about buying stuff you'll have to upgrade later on. I'd rather save up for the best (or one that I'm satisfied with) equipment rather than buying and having to upgrade later.

Of course, some people may argue that acquiring your skills on inferior/entry-level equipment makes it all that much better when you use better equipment, but to each his own.

Posted by saltytheseagull on Aug-23-2006 15:22:

I just noticed you're at purdue too. Where you living?