TranceAddict Forums (www.tranceaddict.com/forums)
- DJ Booth
-- Bedroom DJs...Post Pics of Your Setup Here :)
Pages (379): « 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 [299] 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 »

quote:

Originally posted by leph555 the xone makes the cdj's invisible!!!

you dont get it! the CDJ100s are there in case the Xone92 accidently slides of the table! they must be fixed with nails ))


nice xone dude!!

My new signed Daft Punk Poster is just as important if not more then the rest of the equipment.

that electroma poster is stunning, were did you get it and how did u get it signed, thanks

quote:

Originally posted by Orbital32 My new signed Daft Punk Poster is just as important if not more then the rest of the equipment.

very nice setup bro. Is it Space Tek stands ??

Sexxy setup
i think i see a hercules console too, i also got one of those the mk2 version.

Updated setup once again...

Since the Xone 3D didn't workout for me (and I had foolishly already sold my Xone 92 rotary, which I loved)... I decided to go with a classic style rotary, the Rane MP2016a and XP2016a.

This resulted in a major construction project (since the mixer can only be rack mounted, connectors are on the bottom).

I built the 19" rack (bought the 8U rack rails at guitar center), and cut a 15"x19" hole in the desk underneath it. I also built the CDJ stands and the stand for the Trigger Finger (for use with Torq) out of pipe fittings and plywood.

Lighting was done with 2 Chauvet LED color splash JR's under the desk, and two LED light strips on the bottom of the CDJ stands (for lighting the mixer area).

gorgeous man.

Thanks! Was a lot of work, but came out better than I expected in the end.

quote:

Originally posted by SPAWNmaster gorgeous man.

quote:

Originally posted by Ryan0751 Updated setup once again... Since the Xone 3D didn't workout for me (and I had foolishly already sold my Xone 92 rotary, which I loved)... I decided to go with a classic style rotary, the Rane MP2016a and XP2016a. This resulted in a major construction project (since the mixer can only be rack mounted, connectors are on the bottom). I built the 19" rack (bought the 8U rack rails at guitar center), and cut a 15"x19" hole in the desk underneath it. I also built the CDJ stands and the stand for the Trigger Finger (for use with Torq) out of pipe fittings and plywood. Lighting was done with 2 Chauvet LED color splash JR's under the desk, and two LED light strips on the bottom of the CDJ stands (for lighting the mixer area).

that's the sickest setup i've ever seen on this site... incredible!

you seem like you're not only a talented dj, but also an engineer/architect/artist/crafter. you should have no problem painting those tech's black while you're at it

Maybe that's an excuse to get M5G's

quote:

Originally posted by discobiscuit you seem like you're not only a talented dj, but also an engineer/architect/artist/crafter. you should have no problem painting those tech's black while you're at it

quote:

Originally posted by Ryan0751

Thats Fooking Amazing mannn.. never seen such a beauty before.. really nice...

quote:

Originally posted by Ryan0751 Updated setup once again...

Whoa...

quote:

Originally posted by Neo Hacker very nice setup bro. Is it Space Tek stands ??

Actually those are my custom made stands.

http://www.tranceaddict.com/forums/...threadid=327876

quote:

Originally posted by [friTTe] Sexxy setup i think i see a hercules console too, i also got one of those the mk2 version.

oh yeah before i started out with the turntables I used to rock Vitural DJ and Traktor studio. Now i just use it to record the to the computer. Actually it works pretty good going through the mixer as well.

Ahh... the PVC has better angle selections than the pipe fittings I used. My pipe fitting brackets are so sturdy you'd pull the desk over before moving the CDJ.

quote:

Originally posted by Orbital32 Actually those are my custom made stands. http://www.tranceaddict.com/forums/...threadid=327876 oh yeah before i started out with the turntables I used to rock Vitural DJ and Traktor studio. Now i just use it to record the to the computer. Actually it works pretty good going through the mixer as well.

quote:

Originally posted by Orbital32 Actually those are my custom made stands. http://www.tranceaddict.com/forums/...threadid=327876

wow very nice work man !!!

just got my EFX1000, picture of my setup updated, soon

quote:

Originally posted by Ryan0751 Updated setup once again... Since the Xone 3D didn't workout for me (and I had foolishly already sold my Xone 92 rotary, which I loved)... I decided to go with a classic style rotary, the Rane MP2016a and XP2016a. This resulted in a major construction project (since the mixer can only be rack mounted, connectors are on the bottom). I built the 19" rack (bought the 8U rack rails at guitar center), and cut a 15"x19" hole in the desk underneath it. I also built the CDJ stands and the stand for the Trigger Finger (for use with Torq) out of pipe fittings and plywood. Lighting was done with 2 Chauvet LED color splash JR's under the desk, and two LED light strips on the bottom of the CDJ stands (for lighting the mixer area).

Is this the same one on Dj forums??? saw this pic on the dj set up thread.

OMG someone copied me!

Yeah it's the same setup

quote:

Originally posted by blitzz Is this the same one on Dj forums??? saw this pic on the dj set up thread.

Alright, new pictures as promised ! Added the EFX1000


Setup :

2x CDJ800MK2
1x Xone92 Linear
1x HDJ100 headphones
1x EFX1000
1x Odyssey L-Stand bracket for the EFX
Roadready roadcases (for mixer, cdjs). UDG bag for EFX coming soon.
Sefour X10 to hold everything

Pretty sweet. Where are the speakers?

quote:

Originally posted by DJChrisB Pretty sweet. Where are the speakers?

lol I knew someone would ask me that

Speakers are an old Panasonic AK300 setup near my computer (on the opposite side of the room). Speakers are ok, but I usually use my headphones (Pioneer HDJ1000) because I'm in an appartment. I might sell my Panasonic speakers for M-Audio or KRK but I have no room near my setup for that, so they would be near my computer at the same place of my Panasonic ones. I have no problems mixing with speakers on my back.

But first, before buying new gear, I need to pay the EFX

How is the EFX working out? I'm debating getting one, or just waiting to integrate ableton again (dunno if I'm going to bother after my Xone 3D experiment went so badly).

It's so big though! Almost the size of a CDJ

quote:

Originally posted by Neo Hacker lol I knew someone would ask me that Speakers are an old Panasonic AK300 setup near my computer (on the opposite side of the room). Speakers are ok, but I usually use my headphones (Pioneer HDJ1000) because I'm in an appartment. I might sell my Panasonic speakers for M-Audio or KRK but I have no room near my setup for that, so they would be near my computer at the same place of my Panasonic ones. I have no problems mixing with speakers on my back. But first, before buying new gear, I need to pay the EFX

quote:

Originally posted by Ryan0751 How is the EFX working out? I'm debating getting one, or just waiting to integrate ableton again (dunno if I'm going to bother after my Xone 3D experiment went so badly). It's so big though! Almost the size of a CDJ

I love it. It has a lot of tricks you can learn (like a feedback loop or the 3 bands isolator kill). I'm still learning how this thing works

For those who might be interested to know how it is connected. The input of my EFX is plugged into AUX1 of my Xone and then the output to the Channel 4 of my Xone. This allow me to use the crossfader of the Xone as a wet/dry control. Much more useful than the standart AUX fader on the Xone in my opinion

Yep, that's the way to hook it up if you have the extra channel input!

It has it's own wet/dry control right? I just got the Rane, and the effect insert is only on the master...

quote:

Originally posted by Neo Hacker I love it. It has a lot of tricks you can learn (like a feedback loop or the 3 bands isolator kill). I'm still learning how this thing works For those who might be interested to know how it is connected. The input of my EFX is plugged into AUX1 of my Xone and then the output to the Channel 4 of my Xone. This allow me to use the crossfader of the Xone as a wet/dry control. Much more useful than the standart AUX fader on the Xone in my opinion

quote:

Originally posted by Ryan0751 Yep, that's the way to hook it up if you have the extra channel input! It has it's own wet/dry control right? I just got the Rane, and the effect insert is only on the master...

yep it does

Powered by: vBulletin
Copyright © 2000-2021, Jelsoft Enterprises Ltd.