TranceAddict Forums (www.tranceaddict.com/forums)
- DJ Booth
-- Bedroom DJs...Post Pics of Your Setup Here :)
Pages (379): « 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 [131] 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 »

I would've bought a CDJ1000 and a CDJ 800 instead of 3 800's

Well i've finally drawn up the plans to the Dj table i'm going to be making soon enough.

I've always liked the look of the Sefour x30 so thought i'd try (free hand) and recreate it. Only started using a 3d CAD program the other week but this is what i've come up with. Instead of it being similar enough, i've decided to make some exterior changes to it. Should look ok when it's done.

But mainly i'm just looking forward to the woodwork, if i get time to do it

Here's the drawing of the table.



And here is the table looking a little more realistic.



And it would be nice if everything could be done in perspex but.. this is about as close to that as i'm going to come.



Hopefully i'll be able to start building the table soon enough, i'll post some pics of the finished product then. It isn't going to be half as nice as the real thing but should do the trick nicely

nelly

Looks real nice.

Should work a treat, don't see much wrong with that at all.

quote:

Originally posted by Trance Nutter Looks real nice. Should work a treat, don't see much wrong with that at all.

Cheers mate, fingers crossed it comes out resembling the above slighty

D@ve: Just wondering, How did you get a piece of MDF that long? Maybe it's just me but the top piece looks longer then 8ft.. maybe it isn't though

Joost's pics on this page are Christian O's, and the pics in his post on the previous page are mine.

With mine - the mdf top is 2.5 metres long, you can buy lengths about 2600 here (i think, you can pretty much get any length you want).....

Just looking at your plans, maybe put a rectangular frame (made out of pine 2in by 4in) at the bases of your shelve units. On top of this havea solid shelf. It may not look quite as good, but it will probably provide a support for your table, it'll help brace your shelf sections and this should help brace the whole unit. Up to you though, it should be more than strong enough if you have backing boards on it.

quote:

Originally posted by Trance Nutter Joost's pics on this page are Christian O's, and the pics in his post on the previous page are mine. With mine - the mdf top is 2.5 metres long, you can buy lengths about 2600 here (i think, you can pretty much get any length you want)..... Just looking at your plans, maybe put a rectangular frame (made out of pine 2in by 4in) at the bases of your shelve units. On top of this havea solid shelf. It may not look quite as good, but it will probably provide a support for your table, it'll help brace your shelf sections and this should help brace the whole unit. Up to you though, it should be more than strong enough if you have backing boards on it.

Hey, cheers for the heads up. Just looked at it again and it's actually D@ve's set up i think.

Hmmmm maybe it just looks extra long in the picture then.

Regarding my table, it's all going to be made of 18mm MDF. The back board is also going to be made of 18mm mdf, and the whole lot is going to be Glued and Screwed. Should be sturdy as a house! (hopefully lol, touch wood)

Cheers for the idea though, if it isn't sturdy enough when it's finished i'll be doing that

Monitor is on the floor, because of an upgrade to a lcd. then i gonna put it on the wall
3 cdj's, because i use that, 1000mk2 is too expensive.

MDF is inexpensive but heavy. I used "baltic birch" plywood, it has more layers than regular plywood so it's stronger and you can use thinner material. That's what I used for my little tabletop - I take it to houseparties so lightweight is good.

My new set:



I sold 1 CDJ-1000MK2. and borrowed 2 Technics 1210 MK2. If I receive the money of the CDJ-1000 i will bring the MK2 back and buy 1210 MK5's

Now you see from the left to the right:

CDJ-1000 MK2
Technics 1210 MK2
EFX-500
DJM-500
RP DJ-1210
Technics 1210 MK2
CDJ-1000 MK2

DJocker where do you live and do you leave any windows open in your house when you leave?

woot. my new decks came in today. hey back away yes its a dj in a box dealie but ITS MY DJ IN A BOX DEALIE!

-Click image to enlarge-











Stanton 500B CARTRIDGES
SMX-201 MIXER
STR8-30 TURNTABLES
Klipsch Promedia 2.0s as monitors
Headphones soon to be upgraded

If you have any questions feel free to ask

quote:

Originally posted by jupiterone DJocker where do you live and do you leave any windows open in your house when you leave?

haha I live in The Netherlands and nopes ... I don't leave a window open, but if you want to come here ...


watch out for the dog!

quote:

Originally posted by DJocker haha I live in The Netherlands and nopes ... I don't leave a window open, but if you want to come here ... watch out for the dog!

Is that pic 1:1 size? That is a chihuahua, right?

quote:

Originally posted by Specimen303 Is that pic 1:1 size? That is a chihuahua, right?

no a BOXER! hehe

^don't listen to him he lies, that thing is smaller than a cat!.... Just Open the window, jump right into his room and watch the Good times roll!

Djocker you don't happen to have a video camera on you by any chance?

2 x Technics 1210MK2
1 x Pioneer CDJ 800
1 x Numark Axis 2 (soon to be replaced by 800 or 1000 undecided!)
1 x Sony MDR V700
2 x Ortofon Nightclub S (Concorde)
1 x Pioneer DJM 600s

nice

Update
Finally upgrades from cdj 100s to 800s

2x pioneer CDJ 800
2x tech mk5 with Whitelabels
xone:62 (taking care of it while my friend is out of town)
senn hd 280
dell 700m
some aiwa stereo that i use for monitors :/

and i plan on putting some cloth or something to cover up the wires and make it look cleaner, but not sure what yet...

quote:

Originally posted by cryo

awesome set up man!

New Table for my gear :

Empty....


Filled :

now THAT is a bloody nice set up!

love the mixer Groovejunk
i want one of those myself

quote:

Originally posted by Groovejunk New Table for my gear : Empty....

where did you get that turntable stand thingy?

quote:

Originally posted by dj_lane where did you get that turntable stand thingy?

Build that myself

Powered by: vBulletin
Copyright © 2000-2021, Jelsoft Enterprises Ltd.